CORRUGATED ROOF
When fitting to corrugated roofs the gutter mesh is taken from the outside of the gutter to the lower part of the roof creating a positive slope, this allows leaf debris to simple slide off, and not enter your gutters.
The gutter mesh is fitted to the corrugated by colour bond roof clips which are fitted to every second corrugation, the roof clips are designed and made by Fours Seasons, this ensures a strong quality fitting.
TILE ROOFS
The FOUR SEASONS GUTTER PROTECTION system is designed in such a way as to admit maximum water, yet prevent all leaf and/or pest entry over an estimated working life of 20 years.
The Four Seasons Superior Free Flow Gutter Mesh design incorporates:
- A large selection of colours are available ensuring the system to colour co-ordinate with your home.
- Angled directional strips ensure water is directed into your gutters and not off the roof.
- Directional strips on the top and under side of the mesh giving extra strength and longevity to the mesh.
- The raised upper surface lifts debris from the face of the mesh, allowing a sliding effect and air movement to remove debris from your roof.
- Colour bond trims, matched to the colour of your gutters, which also gives extra strength to your gutters.
- Four Seasons has recently obtained a Fire Rating of “1″ as tested by the CSIRO, and this enables Four Seasons to offer one of the highest fire ratings available, protecting your home from ember attacks.
The Four Seasons Supeiror Free Flow Mesh fits most homes or buildings – slate, deck, tile and corrugated roofs, and colour coded to match your roof and gutters.
Our manufacturer
The newly designed Superior Free Flow Control Mesh is manufactured by Tapex a wholly owned and operated Australian company. Having its base in Sydney, Tapex was established in 1883 and is still owned today by the original family, successfully servicing the Australian Market for over 100 years.
Real Benefits
- No maintenance
- No cleaning
- Newly Designed Superior Free Flow Control Mesh
- Highest UV stabilizing formula available
- High Carbon Content
- Only virgin raw material used
- Estimated working life approximately 20 years
- Molten temperature 320 degrees
- Weight 1kg per square metre
- 20 years Extended Warranty
- 7 years workmanship(as per masterbuilder)
- Specially designed for water collection
- Water is directed into the gutters, not off the roof
- Food quality rating for water collection
- Australian Made
Flow Control Gutter Mesh
Flow Control gutter mesh is manufactured by Tapex based in Sydney NSW exclusively for Four Seasons Gutter Protection for our gutter guard.
Flow Control gutter mesh is also available in Fire Guard 1000 Rated 1 by CSIRO AS 3959, Tear resistant, Full rain water collection design.
Flow Control gutter mesh specification:
- Overall mesh thickness 3.2mm
- Overall hole size width 2.5mm, length 4.5mm
Upper Strand
- Strand Thickness 1.6mm
- Strand Width 1.6mm
Lower Strand
- Strand Thickness 1.6mm
- Strand width 1.6mm
Compound
Four Compound process
- UV high grade
- Silica bonding agent
- Colour pigment, As specified
- HDPE Virgin grade polyethylene
Molten temperature 360 degrees
Mesh manufactured 30 metre roll, 1 metre wide
colours, most colour bond colours.
Fittings:
Trims
- High tensile colourbond steel, 0.55
- Available in all colour bond colours
Roof Clips, Corrugated
- High tensile colour bond steel, 0.55
- Three independent strength band
- Tapered edge for seal to corrugation
- Available in all colour bond colours
Roof Clips, Corrugated
- High tensile colour bond steel, 0.55
- Three independent strength band
- Tapered edge for seal to corrugation
- Available in all colour bond colours
Guaranteed, “Find a system that outperforms the Free Flow mesh within 12 months of installation and we’ll fit it for your free